easttn4x4

4-wheeling in northeast TN

Skip to content


Welcome
Welcome to <strong>easttn4x4</strong>.

You are currently viewing our boards as a guest, which gives you limited access to view most discussions and access our other features. By joining our free community, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content, and access many other special features. Registration is fast, simple, and absolutely free, so please, <a href="/profile.php?mode=register">join our community today</a>!

Welcome cat311c

Tell us a little about your ride
Post a reply

Welcome cat311c

Postby tennbronco on Tue Oct 07, 2008 8:52 am

Welcome glad to have ya.
Hammer down and hit it hard or get out of my way and let me do it !!!
tennbronco
hot dog
 
Posts: 338
Joined: Wed Apr 11, 2007 2:22 pm
Location: Johnson City, TN.
Top

Postby broncomania on Tue Oct 07, 2008 6:13 pm

welcome.
broncomania
newbie
 
Posts: 41
Joined: Mon Sep 15, 2008 8:57 pm
Top

Postby Greezysidedown on Tue Oct 14, 2008 11:10 pm

Welcome aboard
my jeep travels at half the speed of smell.
Image
Greezysidedown
newbie
 
Posts: 9
Joined: Mon Aug 25, 2008 11:07 pm
Top

Postby cat311c on Mon Oct 27, 2008 7:50 pm

Thanks guys. Can't wait to find a job and get back to working on the YJ. Have to get the tranny rebuilt and then the motor work starts. It should be fun probably gonna need some help when the time comes. It is gonna be my first motor build. AMC 360. I am going to use all Edelbrock (performer cam,performer intake,650cfm offroad carb,timing set). Will be running a turbo 400 tranny with a dana 20 transfer case. Then the axle hunt will begin Gubni lol. Dana 60's front and rear. Not sure on tire size yet either 38's or 40's leaning towards 40's. I know I am going to run ARB's front and rear though.
YJ in progress. AMC 360,Turbo 400,Dana 20, Dana 60's front and rear.Revolver Shackles in the rear.
User avatar
cat311c
newbie
 
Posts: 3
Joined: Mon Oct 06, 2008 8:23 pm
Location: Bristol,Va
Top

Postby tennbronco on Tue Oct 28, 2008 6:51 am

Check out our vendors section for your tranny rebuild.
Hammer down and hit it hard or get out of my way and let me do it !!!
tennbronco
hot dog
 
Posts: 338
Joined: Wed Apr 11, 2007 2:22 pm
Location: Johnson City, TN.
Top

Postby cat311c on Sun Nov 23, 2008 9:34 pm

Well if everything goes well. I will be starting my new job this week. I have also found a tow rig that I will be getting before I start the build on the YJ and I have decided to run 44's instead of 38's or 40's. I might as well build it big if I want it big. Yes I will be driving on and offroad. Just now that I found the tow rig it is going to take alittle longer before I start the build. Hope everyone is doing well and have a GREAT THANKSGIVING.
YJ in progress. AMC 360,Turbo 400,Dana 20, Dana 60's front and rear.Revolver Shackles in the rear.
User avatar
cat311c
newbie
 
Posts: 3
Joined: Mon Oct 06, 2008 8:23 pm
Location: Bristol,Va
Top
Post a reply

Return to New users

Who is online

Users browsing this forum: No registered users and 0 guests

Donate Now
Donate Now
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Hosted by FreeForums.org | Create a free forum

cron