3/8" thick laser cut brackets
DOM bracket spacers
grade 8 annodized mounting hardware
new GM rotors
rebuilt GM calipers with steel pistons
semi metallic brake pads
new inner hub seals
caliper pins
rubber flex hoses
banjo bolts with copper washers
anti-rattle clips
I have kits for these axles:
73-87 chevy single rear wheel full floater 14 bolt axle 10.5" ring gear
62-72 eaton corporate rear end, full floater ( same kit as the 73-87 14 bolt)
88-up second generation 14 bolt 10.5 full floater/ need to know:
if drums slide off after removing wheel-need "gen 2" kit/ if wheel is removed and drum is still captured by wheel hub and studs then customer needs 73-87 14 bolt kit. (there is no reasoning as to what year will have what, we have seen both versions all thru the 90s)
79-up 14 bolt semi-float 6 lug 9.5" rear axle / not positive what year this axle was first produced / this kit sells for $330.00 because new wheel studs come with it.
79-up 14 bolt semi-float 8 lug 9.5" rear axle / basically same details as 6 lug kit including price of $330
72-79 ford dana 60 rear axle/ have found that it will fit 68-71 ford dana 60 rear axles but slight spacer modification is sometimes required using flat washers.
76-93 dodge dana 60 rear axle
94-up dodge dana 60 rear axle
68-72 chevy dana 60 rear axle
72-up jeep pick-up dana 60 rear axle( jeep took over the gm dana 60 rear axle in 1972 when chevy dumped it in favor of the 14 bolt) same kit as the chevy 60
Other axles? Generally I have found that these same rotors will work on most other axles, but you will need to use weld on brackets. Just tell me the diameter of the tube near the end of the axle and I will send you weld on brackets.
Instructions? No I don't have detailed instructions. This is really simple to install for anyone who has a clue about how brakes work. Only word of advise is most of my kits require the rotor on the backside of the hub.
Emergency brakes? Sorry, but I don't offer them. I reccomend a "line lock", but if you can get different calipers I will take off $45 from my price without loaded calipers.
I accept paypal or postal money orders. Orders will ship from west TN generally on weekends. I do not sell to or ship to Canada. Send paypal to gubni at comcast dot net and include the year and type of axle you need the kit for. You can also call me if you want 423-737-0265 -- Shawn. I cannot accept credit cards over the phone at this time.
